Ulp

• Overview
• Product Description
• Specification
• Company Profile
• Certifications
• Exhibition
• Customer Visits
• Packaging & Shipping

Overview

Basic Info.

Model NO.	ULP-8040
Housing Material	FRP
Housing Dia.	8inch
Housing Length	40inch
Application	Well Water Treatment
Permeate Flow	13300/50.3
Rejection Rate	99.5%
Active Membrane Area	37.2
Recovery Rate	15%
pH Range of Feed Water	2-11
Max. Temperature of Feed Water	45 Centigrades
OEM	Logo Custom
Transport Package	Cardboard Boxes/Wooden Cases
Specification	ULP-8040
Trademark	JHM
Origin	China Mainland
HS Code	842199
Production Capacity	1 Million PCS/Year

Packaging & Delivery

Package Size112.00cm * 13.00cm * 26.00cm

Product Description

Product DescriptionJHM SW seriesSW series of sea water aromatic polyamide RO element developed by JHM for seawater desalination. This series of elements have the characteristics of low operating pressure, low equipment investment, good desalination performance and stability. Among them, the SW8040-400 have the highest desalination rate of 99.85%, which ensure that drinking water can be produced from seawater through one pass RO system.SW series membrane elements are generally suitable for the treatment of seawater and brackish water with high concentration. It can be used for seawater desalination, desalination of brackish water with high concentration, boiler replenishment water in power plants, wastewater reuse, concentration and recovery of high value-added substances such as food and pharmaceuticals, etc.

Module	Active Membrane Area	Average Permeate	Stable rejection	Min rejection	B rejection
	ft2 (m2 )	GPD(m³/d)	Rate(%)	Rate(%)	Rate(%)
JHMSW8040-400	400(37.2)	7500(28.4)	99.85	99.7	93
JHM SW8040-440	440(41)	8250(31.2)	99.8	99.7	93
JHM SW4040	85(7.9)	1900(7.2)	99.8	99.6	92
JHM SW8040-440	440(41)	8990(34)	99.8	99.7	93
JHM SW8040LE-400	400(37.2 )	9000(34.1 )	99.8	99.5	92
JHM SW8040-400V	400(37.2)	9000(34.1)	99.8	99.5	92

Test conditions
Testing pressure	800Psi(5.5Mpa)
Testing solution temperature	25℃
Concentration of testing solution	32000ppm Nacl,5ppm B.
pH value of testing solution	8.0
Recovery rate of Single element	8%
Operation limits & conditions
Max. Working Pressure	1200psi(8.27Mpa)
Max. Temperature of Feed water	45℃
Max. Volume of Feed water	75gpm(17 m3 /h)
Max. Feed water SDI 15	5.0
Max. Feed water Turbidity	1.0NTU
pH Range of Feed water during Continuous Operation	2-11
pH Range of Feed water during Chemical Cleaning	1-13
Residual Chlorine Concentration of Feed Water	<0.1ppm
Max. Pressure Drop of Single Membrane Element	15psi(0.1Mpa)
Max. Pressure Drop of Single Pressure Vessel with Six elements	50psi(0.34Mpa)
Size of Membrane Element:	1.0 inch = 25.4 mm

RO Membrane Application*Municipal drinking water purification: Removes impurities, heavy metals and microorganisms.
*Industrial pure water production (electronics, chemical, pharmaceutical and other industries).
*Seawater/brackish water desalination: Addresses water scarcity.
*Industrial wastewater reuse and treatment: Reduces environmental emission pressure.
*Food and beverage processing (juice concentration, drinking water purification).
*Pharmaceutical industry: Purification of injection water and preparations.
*Core filtration component for household water purifiers.Specification

JHM8inch RO Membrane
No.	Model	Permeate Flow RateGPD/M3/d	Effective Area ft2(m2)	Rejection Rate		Test condition
				Min.	Stable	Pressure (PSI)	NaCl	Recovery
				(%)	(%)			rate
1	SW8040-400	7500/28.4	400(37.2)	99.7	99.85	800	32000	8%
2	SW8040-440	8250/31.2	440(41)	99.7	99.85	800	32000	8%
3	FR8040-400	11000/41.6	400(37.2)	99.4	99.7	225	2000	15%
4	LP8040-400	11000/41.6	400(37.2)	99.4	99.7	225	2000	15%
5	LP8040-440	12650/48	440(41)	99.4	99.7	225	2000	15%
6	ULP8040-400	12100/45.8	400(37.2)	99	99.5	150	1500	15%
7	ULP8040-440	13300/50.3	440(41)	99	99.5	150	1500	15%
8	XLP8040-400	9500/36.0	400(37.2)	98.5	99	100	500	15%
9	XLP8040-440	10500/39.7	440(41)	98.5	99	100	500	15%
JHM 4inch RO Membrane
No.	Model	Permeate Flow RateGPD/(m3/d)	Effective Area ft2(m2)	RejectionRate		Test condition
				Min.	Stable	Pressure (PSI)	NaCl	Recovery
				(%)	(%)			rate
1	SW4040	1900/7.2	85(7.9)	99.6	99.8	800	32000	8%
2	FR4040	1900/7.2	73(7.0)	99.4	99.7	225	2000	15%
3	LP4040	2600/9.8	87(8.0)	99.4	99.7	225	2000	15%
4	ULP4040	2850/10.8	87(8.0)	99.3	99.5	150	2000	15%
5	XLP4040	2600/9.8	93.5(8.7)	98.5	99	100	500	15%

JHM commercial ro membrane
Model	Type	Permeae flow		Rejection Rate	Membrane Area		Testing Condition (25℃)
							Testing pressure		NaCl
		GPD	m3/d	%	ft2	m2	psi	Mpa	Mg/L
SW4021	Commercial SWRO	750	2.8	99.5	33	3.1	800	5.52	32000
SW2521		270	1	99.5	12	1.1
SW2540		600	2.3	99.5	28	2.6
ULP4021	Ultralow pressure elements	950	3.6	99	36	3.3	150	1.03	1500
ULP2521		300	1.13	99	14	1.3
ULP2540		750	2.84	99	30	2.8

Company Profile

Certifications

Exhibition

Customer Visits

Packaging & Shipping

Q: Can l propose this product as a direct equivalent to my customer?
A: Yes, this is an equivalent with quick delivery for your customer, which is more beneficial to you and your customer.

Q: Does this equivalent require modifying the pipes and systems?
A: No, end users don't need to modify pipes or PLC of existing systems to have same flow rate and high-quality filtrate. However, it needs to be analyzed again based on the specific product.

Q: Are you a manufacturer?
A: Yes, Jinhuimo are an ISO 9001:2015 quality management system certified manufacturer and our factory passed environmental impact assessment. We are also an audited supplier by TUV/SGS, You are welcome to visit our factory.

Q: What are your main product?
A: JHM develop and manufacture UF, RO membranes,EDI and MBR membranes used in water and wastewater treatment projects.

Q: What is your minimum order quantity?
A: Our minimum order quantity is 1 piece because sometimes our distributors and engineering partners need to make trials and work on small projects, and we will support them in these cases.

Q: Do you provide good discount to agents, distributors and engineering companies?
A: Yes. To support the business of our agents, distributors and engineering partners, we provide great discount on win-win basis.

Q: Do you offer OEM?
A: Yes, we do. JHM do customization upon your request (capacity, feed water quality, applications etc. and provide private labels.

Q: Do you offer warranty for your products?
A: Yes, we do. JHM offer 12 - 60 months warranty depending on product series, water quality and operation conditions.

Q: Can l buy samples?
A: Yes, We provide discounted samples for testing and trial purpose.

Q: What shipping method do you usually use?
A: We are shipping products by sea, train, truck, air cargo and courier according to the requirements of the customers and trade terms.

Q: How can l contact you?
A: You can send us an inquiry on made-in-china.com or send us an email, or contact us on WhatsApp or WeChat.